Trilion presenting image correlation (DIC) & photogrammetry for Full-field deformation & strain measurement

Thank you for staying current with news about Trilion Quality Systems and our advances in the market for 3D image correlation, dynamic photogrammetry and optical inspection systems for industry. In our Events section, you will see a list of the venues that we plan to attend. We'll see you there!

May 3-4 Trilion User Group Meeting
Location: The Radnor Hotel, St. Davids, PA
Applications: Full field 3D Test and Measurement
Methods: ARAMIS, ARGUS, PONTOS, TRITOP,

May 10 Optical Measurement Workshop
Featuring: GOM, Trilion, Capture 3D and UA-Huntsville
Location: Jacobs Technology Conference Center, Huntsville, Al
Applications: Simulation verification, Full field 3D Test and Measurement, Material property determination,
Structural testing, Forming analysis, Component dimensioning, Dynamic testing
Methods: ARAMIS, ARGUS, PONTOS, TRITOP, ATOS

May 17 Optical Measurement Workshop
Featuring: GOM, Trilion, Capture 3D, UMI-Dearborn
Location: University of Michigan, Dearborn, Detroit, MI
Applications: Simulation verification, Full field 3D Test and Measurement, Material property determination
Methods: ARAMIS, ARGUS, PONTOS, TRITOP, ATOS

May 23 Optical Measurement Workshop
Featuring: GOM, Trilion, Capture 3D
Location: Hilton Long Beach, Long Beach, CA
Applications: Simulation verification, Full field 3D Test and Measurement, Material property determination
Methods: ARAMIS, ARGUS, PONTOS, TRITOP, ATOS

May 24-26 SAMPE 2011
State of the Industry: Advanced Materials, Applications, and Processing Technology
Location: Long Beach, CA
Applications: Aerospace, Composites, Automotive, Casting & Forging
Methods: ARAMIS, ARGUS, PONTOS, TRITOP, ATOS

June 7 Optical Measurement Workshop
Featuring: GOM, Trilion, Capture 3D
Location: Houston, TX
Applications: Simulation verification, Full field 3D Test and Measurement, Material property determination
Methods: ARAMIS, ARGUS, PONTOS, TRITOP, ATOS

June 13 - 16 SEM 2011
SEM Annual Conference and Exposition on Experimental and Applied Mechanics
Location: Mohegan Sun, Uncasville, CT
Applications: Thermomechanics and Infra-Red Imaging, Experimental and Applied Mechanics, Engineering applications of Residual Stress
Methods: ARAMIS, ARGUS, PONTOS, TRITOP, ATOS

For further information about events, please contact Fell McIlvain at 215-710-3000

Click here to view the recording of the Optical Metrology Webinar that was held on March 2, 2011.
12/03/10 NASA selects Trilion Quality Systems to use ARAMIS on Tanking Test for Space Shuttle STS-133 on the Launch Pad during the cyrogenic tanking test to confirm stringer repair in preparation for February 2011 launch.
9/20/10 Trilion will be featured at the 2010 GOM Deformation conference where VP Tim Schmidt will be the keynote speaker of the deformation conference talks.
9/15/10 Trilion will be participating in the Quality, Test and Measurement e-conference sponsored by GlobalSpec. Stop by our booth for a chance to win official 4GB Trilion Memory Sticks.
6/14/10 Go Lean 3D Measurment Workshop - Trilion will be teaming with Capture 3D for the 2010 Go Lean 3D Measurment Workshops in Wichita, Kansas sponsored by the National Institute for Aviation Research (NIAR) Wichita State University
3/1/10 David Hastings joins Trilion to lend his expertise in project management.
2/15/10 See PONTOS and ARAMIS on the cover of the February 15, 2010 issue of Aviation Week care of NASA.
1/24/10 Trilion is the industry partner working with Northeastern University on the VOTERS project with the goal of developing a reliable, safe, and cost effective highway assessment and maintenance system.
10/12/09 Eric Schwartz has joined Trilion as an Applications Engineer from Drexel University.
10/1/09 John "Yanni" Psilopoulos has joined Trilion as an expert in the ARGUS technology.
10/1/09 Optical Metrology Workshop - Dearborn, co-spnsored by U.Michigan-Dearborn
9/28/09 Optical Metrology Workshop - Seattle, teamed with Capture3D and GOM
1/2/09 New expanded facilities for Trilion Quality Systems.
11/10/08 Vinh Tran opens West Coast Trilion office.
4/20/08 University of Southern Mississippi is recognized as a Center of Excellence for composites engineering.
6/29/07 Mechanical Engineering Department at the University of Michigan-Dearborn recognized as Center of Excellence for use of ARAMIS system in Split-Hopkinson Bar testing
8/06/06 Trilion wins SBIR Phase II with Eglin AFB developing High-speed ARAMIS and teamed with OSU
3/15/05 Trilion completes work with NASA to validate LS-DYNA models for return to fight program